From 16b6bf81031717a35e4a583f93b7bc73c814adde Mon Sep 17 00:00:00 2001 From: icecheng Date: Thu, 23 Oct 2025 17:30:28 +0800 Subject: [PATCH] feat: update postgresql-ha values --- .../gitea/charts/postgresql-ha/values.yaml | 824 +++++++++++++++++- 1 file changed, 823 insertions(+), 1 deletion(-) diff --git a/freeleaps/helm-pkg/3rd/gitea/charts/postgresql-ha/values.yaml b/freeleaps/helm-pkg/3rd/gitea/charts/postgresql-ha/values.yaml index cdbd405e..ac9e1f76 100644 --- a/freeleaps/helm-pkg/3rd/gitea/charts/postgresql-ha/values.yaml +++ b/freeleaps/helm-pkg/3rd/gitea/charts/postgresql-ha/values.yaml @@ -609,7 +609,829 @@ postgresql: ## port = '5432' ## ... ## - configuration: "" + configuration: |- + # ----------------------------- + # PostgreSQL configuration file + # ----------------------------- + # + # This file consists of lines of the form: + # + # name = value + # + # (The "=" is optional.) Whitespace may be used. Comments are introduced with + # "#" anywhere on a line. The complete list of parameter names and allowed + # values can be found in the PostgreSQL documentation. + # + # The commented-out settings shown in this file represent the default values. + # Re-commenting a setting is NOT sufficient to revert it to the default value; + # you need to reload the server. + # + # This file is read on server startup and when the server receives a SIGHUP + # signal. If you edit the file on a running system, you have to SIGHUP the + # server for the changes to take effect, run "pg_ctl reload", or execute + # "SELECT pg_reload_conf()". Some parameters, which are marked below, + # require a server shutdown and restart to take effect. + # + # Any parameter can also be given as a command-line option to the server, e.g., + # "postgres -c log_connections=on". Some parameters can be changed at run time + # with the "SET" SQL command. + # + # Memory units: B = bytes Time units: us = microseconds + # kB = kilobytes ms = milliseconds + # MB = megabytes s = seconds + # GB = gigabytes min = minutes + # TB = terabytes h = hours + # d = days + + + #------------------------------------------------------------------------------ + # FILE LOCATIONS + #------------------------------------------------------------------------------ + + # The default values of these variables are driven from the -D command-line + # option or PGDATA environment variable, represented here as ConfigDir. + + #data_directory = 'ConfigDir' # use data in another directory + # (change requires restart) + #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file + # (change requires restart) + #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file + # (change requires restart) + + # If external_pid_file is not explicitly set, no extra PID file is written. + #external_pid_file = '' # write an extra PID file + # (change requires restart) + + + #------------------------------------------------------------------------------ + # CONNECTIONS AND AUTHENTICATION + #------------------------------------------------------------------------------ + + # - Connection Settings - + + #listen_addresses = 'localhost' # what IP address(es) to listen on; + # comma-separated list of addresses; + # defaults to 'localhost'; use '*' for all + # (change requires restart) + #port = 5432 # (change requires restart) + #max_connections = 100 # (change requires restart) + #reserved_connections = 0 # (change requires restart) + #superuser_reserved_connections = 3 # (change requires restart) + #unix_socket_directories = '/tmp' # comma-separated list of directories + # (change requires restart) + #unix_socket_group = '' # (change requires restart) + #unix_socket_permissions = 0777 # begin with 0 to use octal notation + # (change requires restart) + #bonjour = off # advertise server via Bonjour + # (change requires restart) + #bonjour_name = '' # defaults to the computer name + # (change requires restart) + + # - TCP settings - + # see "man tcp" for details + + #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; + # 0 selects the system default + #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; + # 0 selects the system default + #tcp_keepalives_count = 0 # TCP_KEEPCNT; + # 0 selects the system default + #tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; + # 0 selects the system default + + #client_connection_check_interval = 0 # time between checks for client + # disconnection while running queries; + # 0 for never + + # - Authentication - + + #authentication_timeout = 1min # 1s-600s + #password_encryption = scram-sha-256 # scram-sha-256 or md5 + #scram_iterations = 4096 + #db_user_namespace = off + + # GSSAPI using Kerberos + #krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' + #krb_caseins_users = off + #gss_accept_delegation = off + + # - SSL - + + #ssl = off + #ssl_ca_file = '' + #ssl_cert_file = 'server.crt' + #ssl_crl_file = '' + #ssl_crl_dir = '' + #ssl_key_file = 'server.key' + #ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers + #ssl_prefer_server_ciphers = on + #ssl_ecdh_curve = 'prime256v1' + #ssl_min_protocol_version = 'TLSv1.2' + #ssl_max_protocol_version = '' + #ssl_dh_params_file = '' + #ssl_passphrase_command = '' + #ssl_passphrase_command_supports_reload = off + + + #------------------------------------------------------------------------------ + # RESOURCE USAGE (except WAL) + #------------------------------------------------------------------------------ + + # - Memory - + + #shared_buffers = 128MB # min 128kB + # (change requires restart) + #huge_pages = try # on, off, or try + # (change requires restart) + #huge_page_size = 0 # zero for system default + # (change requires restart) + #temp_buffers = 8MB # min 800kB + #max_prepared_transactions = 0 # zero disables the feature + # (change requires restart) + # Caution: it is not advisable to set max_prepared_transactions nonzero unless + # you actively intend to use prepared transactions. + #work_mem = 4MB # min 64kB + #hash_mem_multiplier = 2.0 # 1-1000.0 multiplier on hash table work_mem + #maintenance_work_mem = 64MB # min 1MB + #autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem + #logical_decoding_work_mem = 64MB # min 64kB + #max_stack_depth = 2MB # min 100kB + #shared_memory_type = mmap # the default is the first option + # supported by the operating system: + # mmap + # sysv + # windows + # (change requires restart) + #dynamic_shared_memory_type = posix # the default is usually the first option + # supported by the operating system: + # posix + # sysv + # windows + # mmap + # (change requires restart) + #min_dynamic_shared_memory = 0MB # (change requires restart) + #vacuum_buffer_usage_limit = 256kB # size of vacuum and analyze buffer access strategy ring; + # 0 to disable vacuum buffer access strategy; + # range 128kB to 16GB + + # - Disk - + + #temp_file_limit = -1 # limits per-process temp file space + # in kilobytes, or -1 for no limit + + # - Kernel Resources - + + #max_files_per_process = 1000 # min 64 + # (change requires restart) + + # - Cost-Based Vacuum Delay - + + #vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) + #vacuum_cost_page_hit = 1 # 0-10000 credits + #vacuum_cost_page_miss = 2 # 0-10000 credits + #vacuum_cost_page_dirty = 20 # 0-10000 credits + #vacuum_cost_limit = 200 # 1-10000 credits + + # - Background Writer - + + #bgwriter_delay = 200ms # 10-10000ms between rounds + #bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables + #bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round + #bgwriter_flush_after = 0 # measured in pages, 0 disables + + # - Asynchronous Behavior - + + #backend_flush_after = 0 # measured in pages, 0 disables + #effective_io_concurrency = 1 # 1-1000; 0 disables prefetching + #maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching + #max_worker_processes = 8 # (change requires restart) + #max_parallel_workers_per_gather = 2 # limited by max_parallel_workers + #max_parallel_maintenance_workers = 2 # limited by max_parallel_workers + #max_parallel_workers = 8 # number of max_worker_processes that + # can be used in parallel operations + #parallel_leader_participation = on + #old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate + # (change requires restart) + + + #------------------------------------------------------------------------------ + # WRITE-AHEAD LOG + #------------------------------------------------------------------------------ + + # - Settings - + + wal_level = 'logical' + # (change requires restart) + #fsync = on # flush data to disk for crash safety + # (turning this off can cause + # unrecoverable data corruption) + #synchronous_commit = on # synchronization level; + # off, local, remote_write, remote_apply, or on + #wal_sync_method = fsync # the default is the first option + # supported by the operating system: + # open_datasync + # fdatasync (default on Linux and FreeBSD) + # fsync + # fsync_writethrough + # open_sync + #full_page_writes = on # recover from partial page writes + #wal_log_hints = off # also do full page writes of non-critical updates + # (change requires restart) + #wal_compression = off # enables compression of full-page writes; + # off, pglz, lz4, zstd, or on + #wal_init_zero = on # zero-fill new WAL files + #wal_recycle = on # recycle WAL files + #wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers + # (change requires restart) + #wal_writer_delay = 200ms # 1-10000 milliseconds + #wal_writer_flush_after = 1MB # measured in pages, 0 disables + #wal_skip_threshold = 2MB + + #commit_delay = 0 # range 0-100000, in microseconds + #commit_siblings = 5 # range 1-1000 + + # - Checkpoints - + + #checkpoint_timeout = 5min # range 30s-1d + #checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 + #checkpoint_flush_after = 0 # measured in pages, 0 disables + #checkpoint_warning = 30s # 0 disables + #max_wal_size = 1GB + #min_wal_size = 80MB + + # - Prefetching during recovery - + + #recovery_prefetch = try # prefetch pages referenced in the WAL? + #wal_decode_buffer_size = 512kB # lookahead window used for prefetching + # (change requires restart) + + # - Archiving - + + archive_mode = 'on' + # (change requires restart) + #archive_library = '' # library to use to archive a WAL file + # (empty string indicates archive_command should + # be used) + archive_command = '/bin/true' + # placeholders: %p = path of file to archive + # %f = file name only + # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' + #archive_timeout = 0 # force a WAL file switch after this + # number of seconds; 0 disables + + # - Archive Recovery - + + # These are only used in recovery mode. + + #restore_command = '' # command to use to restore an archived WAL file + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' + #archive_cleanup_command = '' # command to execute at every restartpoint + #recovery_end_command = '' # command to execute at completion of recovery + + # - Recovery Target - + + # Set these only when performing a targeted recovery. + + #recovery_target = '' # 'immediate' to end recovery as soon as a + # consistent state is reached + # (change requires restart) + #recovery_target_name = '' # the named restore point to which recovery will proceed + # (change requires restart) + #recovery_target_time = '' # the time stamp up to which recovery will proceed + # (change requires restart) + #recovery_target_xid = '' # the transaction ID up to which recovery will proceed + # (change requires restart) + #recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed + # (change requires restart) + #recovery_target_inclusive = on # Specifies whether to stop: + # just after the specified recovery target (on) + # just before the recovery target (off) + # (change requires restart) + #recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID + # (change requires restart) + #recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' + # (change requires restart) + + + #------------------------------------------------------------------------------ + # REPLICATION + #------------------------------------------------------------------------------ + + # - Sending Servers - + + # Set these on the primary and on any standby that will send replication data. + + max_wal_senders = '16' + # (change requires restart) + max_replication_slots = '10' + # (change requires restart) + wal_keep_size = '64MB' # in megabytes; 0 disables + #max_slot_wal_keep_size = -1 # in megabytes; -1 disables + #wal_sender_timeout = 60s # in milliseconds; 0 disables + #track_commit_timestamp = off # collect timestamp of transaction commit + # (change requires restart) + + # - Primary Server - + + # These settings are ignored on a standby server. + + #synchronous_standby_names = '' # standby servers that provide sync rep + # method to choose sync standbys, number of sync standbys, + # and comma-separated list of application_name + # from standby(s); '*' = all + + # - Standby Servers - + + # These settings are ignored on a primary server. + + #primary_conninfo = '' # connection string to sending server + #primary_slot_name = '' # replication slot on sending server + hot_standby = 'on' + # (change requires restart) + #max_standby_archive_delay = 30s # max delay before canceling queries + # when reading WAL from archive; + # -1 allows indefinite delay + #max_standby_streaming_delay = 30s # max delay before canceling queries + # when reading streaming WAL; + # -1 allows indefinite delay + #wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name + # is not set + #wal_receiver_status_interval = 10s # send replies at least this often + # 0 disables + #hot_standby_feedback = off # send info from standby to prevent + # query conflicts + #wal_receiver_timeout = 60s # time that receiver waits for + # communication from primary + # in milliseconds; 0 disables + #wal_retrieve_retry_interval = 5s # time to wait before retrying to + # retrieve WAL after a failed attempt + #recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery + + # - Subscribers - + + # These settings are ignored on a publisher. + + #max_logical_replication_workers = 4 # taken from max_worker_processes + # (change requires restart) + #max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers + #max_parallel_apply_workers_per_subscription = 2 # taken from max_logical_replication_workers + + + #------------------------------------------------------------------------------ + # QUERY TUNING + #------------------------------------------------------------------------------ + + # - Planner Method Configuration - + + #enable_async_append = on + #enable_bitmapscan = on + #enable_gathermerge = on + #enable_hashagg = on + #enable_hashjoin = on + #enable_incremental_sort = on + #enable_indexscan = on + #enable_indexonlyscan = on + #enable_material = on + #enable_memoize = on + #enable_mergejoin = on + #enable_nestloop = on + #enable_parallel_append = on + #enable_parallel_hash = on + #enable_partition_pruning = on + #enable_partitionwise_join = off + #enable_partitionwise_aggregate = off + #enable_presorted_aggregate = on + #enable_seqscan = on + #enable_sort = on + #enable_tidscan = on + + # - Planner Cost Constants - + + #seq_page_cost = 1.0 # measured on an arbitrary scale + #random_page_cost = 4.0 # same scale as above + #cpu_tuple_cost = 0.01 # same scale as above + #cpu_index_tuple_cost = 0.005 # same scale as above + #cpu_operator_cost = 0.0025 # same scale as above + #parallel_setup_cost = 1000.0 # same scale as above + #parallel_tuple_cost = 0.1 # same scale as above + #min_parallel_table_scan_size = 8MB + #min_parallel_index_scan_size = 512kB + #effective_cache_size = 4GB + + #jit_above_cost = 100000 # perform JIT compilation if available + # and query more expensive than this; + # -1 disables + #jit_inline_above_cost = 500000 # inline small functions if query is + # more expensive than this; -1 disables + #jit_optimize_above_cost = 500000 # use expensive JIT optimizations if + # query is more expensive than this; + # -1 disables + + # - Genetic Query Optimizer - + + #geqo = on + #geqo_threshold = 12 + #geqo_effort = 5 # range 1-10 + #geqo_pool_size = 0 # selects default based on effort + #geqo_generations = 0 # selects default based on effort + #geqo_selection_bias = 2.0 # range 1.5-2.0 + #geqo_seed = 0.0 # range 0.0-1.0 + + # - Other Planner Options - + + #default_statistics_target = 100 # range 1-10000 + #constraint_exclusion = partition # on, off, or partition + #cursor_tuple_fraction = 0.1 # range 0.0-1.0 + #from_collapse_limit = 8 + #jit = on # allow JIT compilation + #join_collapse_limit = 8 # 1 disables collapsing of explicit + # JOIN clauses + #plan_cache_mode = auto # auto, force_generic_plan or + # force_custom_plan + #recursive_worktable_factor = 10.0 # range 0.001-1000000 + + + #------------------------------------------------------------------------------ + # REPORTING AND LOGGING + #------------------------------------------------------------------------------ + + # - Where to Log - + + #log_destination = 'stderr' # Valid values are combinations of + # stderr, csvlog, jsonlog, syslog, and + # eventlog, depending on platform. + # csvlog and jsonlog require + # logging_collector to be on. + + # This is used when logging to stderr: + logging_collector = 'on' + # and csvlog into log files. Required + # to be on for csvlogs and jsonlogs. + # (change requires restart) + + # These are only used if logging_collector is on: + log_directory = '/opt/bitnami/postgresql/logs' + # can be absolute or relative to PGDATA + log_filename = 'postgresql.log' + # can include strftime() escapes + #log_file_mode = 0600 # creation mode for log files, + # begin with 0 to use octal notation + #log_rotation_age = 1d # Automatic rotation of logfiles will + # happen after that time. 0 disables. + #log_rotation_size = 10MB # Automatic rotation of logfiles will + # happen after that much log output. + # 0 disables. + #log_truncate_on_rotation = off # If on, an existing log file with the + # same name as the new log file will be + # truncated rather than appended to. + # But such truncation only occurs on + # time-driven rotation, not on restarts + # or size-driven rotation. Default is + # off, meaning append to existing files + # in all cases. + + # These are relevant when logging to syslog: + #syslog_facility = 'LOCAL0' + #syslog_ident = 'postgres' + #syslog_sequence_numbers = on + #syslog_split_messages = on + + # This is only relevant when logging to eventlog (Windows): + # (change requires restart) + #event_source = 'PostgreSQL' + + # - When to Log - + + #log_min_messages = warning # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic + + #log_min_error_statement = error # values in order of decreasing detail: + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # info + # notice + # warning + # error + # log + # fatal + # panic (effectively off) + + #log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements + # and their durations, > 0 logs only + # statements running at least this number + # of milliseconds + + #log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements + # and their durations, > 0 logs only a sample of + # statements running at least this number + # of milliseconds; + # sample fraction is determined by log_statement_sample_rate + + #log_statement_sample_rate = 1.0 # fraction of logged statements exceeding + # log_min_duration_sample to be logged; + # 1.0 logs all such statements, 0.0 never logs + + + #log_transaction_sample_rate = 0.0 # fraction of transactions whose statements + # are logged regardless of their duration; 1.0 logs all + # statements from all transactions, 0.0 never logs + + #log_startup_progress_interval = 10s # Time between progress updates for + # long-running startup operations. + # 0 disables the feature, > 0 indicates + # the interval in milliseconds. + + # - What to Log - + + #debug_print_parse = off + #debug_print_rewritten = off + #debug_print_plan = off + #debug_pretty_print = on + #log_autovacuum_min_duration = 10min # log autovacuum activity; + # -1 disables, 0 logs all actions and + # their durations, > 0 logs only + # actions running at least this number + # of milliseconds. + #log_checkpoints = on + log_connections = 'false' + log_disconnections = 'false' + #log_duration = off + #log_error_verbosity = default # terse, default, or verbose messages + log_hostname = 'true' + #log_line_prefix = '%m [%p] ' # special values: + # %a = application name + # %u = user name + # %d = database name + # %r = remote host and port + # %h = remote host + # %b = backend type + # %p = process ID + # %P = process ID of parallel group leader + # %t = timestamp without milliseconds + # %m = timestamp with milliseconds + # %n = timestamp with milliseconds (as a Unix epoch) + # %Q = query ID (0 if none or not computed) + # %i = command tag + # %e = SQL state + # %c = session ID + # %l = session line number + # %s = session start timestamp + # %v = virtual transaction ID + # %x = transaction ID (0 if none) + # %q = stop here in non-session + # processes + # %% = '%' + # e.g. '<%u%%%d> ' + #log_lock_waits = off # log lock waits >= deadlock_timeout + #log_recovery_conflict_waits = off # log standby recovery conflict waits + # >= deadlock_timeout + #log_parameter_max_length = -1 # when logging statements, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables + #log_parameter_max_length_on_error = 0 # when logging an error, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables + #log_statement = 'none' # none, ddl, mod, all + #log_replication_commands = off + #log_temp_files = -1 # log temporary files equal or larger + # than the specified size in kilobytes; + # -1 disables, 0 logs all temp files + #log_timezone = 'GMT' + + # - Process Title - + + #cluster_name = '' # added to process titles if nonempty + # (change requires restart) + #update_process_title = on + + + #------------------------------------------------------------------------------ + # STATISTICS + #------------------------------------------------------------------------------ + + # - Cumulative Query and Index Statistics - + + #track_activities = on + #track_activity_query_size = 1024 # (change requires restart) + #track_counts = on + #track_io_timing = off + #track_wal_io_timing = off + #track_functions = none # none, pl, all + #stats_fetch_consistency = cache # cache, none, snapshot + + + # - Monitoring - + + #compute_query_id = auto + #log_statement_stats = off + #log_parser_stats = off + #log_planner_stats = off + #log_executor_stats = off + + + #------------------------------------------------------------------------------ + # AUTOVACUUM + #------------------------------------------------------------------------------ + + #autovacuum = on # Enable autovacuum subprocess? 'on' + # requires track_counts to also be on. + #autovacuum_max_workers = 3 # max number of autovacuum subprocesses + # (change requires restart) + #autovacuum_naptime = 1min # time between autovacuum runs + #autovacuum_vacuum_threshold = 50 # min number of row updates before + # vacuum + #autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts + # before vacuum; -1 disables insert + # vacuums + #autovacuum_analyze_threshold = 50 # min number of row updates before + # analyze + #autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum + #autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table + # size before insert vacuum + #autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze + #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum + # (change requires restart) + #autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age + # before forced vacuum + # (change requires restart) + #autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for + # autovacuum, in milliseconds; + # -1 means use vacuum_cost_delay + #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for + # autovacuum, -1 means use + # vacuum_cost_limit + + + #------------------------------------------------------------------------------ + # CLIENT CONNECTION DEFAULTS + #------------------------------------------------------------------------------ + + # - Statement Behavior - + + client_min_messages = 'error' + # debug5 + # debug4 + # debug3 + # debug2 + # debug1 + # log + # notice + # warning + # error + #search_path = '"$user", public' # schema names + #row_security = on + #default_table_access_method = 'heap' + #default_tablespace = '' # a tablespace name, '' uses the default + #default_toast_compression = 'pglz' # 'pglz' or 'lz4' + #temp_tablespaces = '' # a list of tablespace names, '' uses + # only default tablespace + #check_function_bodies = on + #default_transaction_isolation = 'read committed' + #default_transaction_read_only = off + #default_transaction_deferrable = off + #session_replication_role = 'origin' + #statement_timeout = 0 # in milliseconds, 0 is disabled + #lock_timeout = 0 # in milliseconds, 0 is disabled + #idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled + #idle_session_timeout = 0 # in milliseconds, 0 is disabled + #vacuum_freeze_table_age = 150000000 + #vacuum_freeze_min_age = 50000000 + #vacuum_failsafe_age = 1600000000 + #vacuum_multixact_freeze_table_age = 150000000 + #vacuum_multixact_freeze_min_age = 5000000 + #vacuum_multixact_failsafe_age = 1600000000 + #bytea_output = 'hex' # hex, escape + #xmlbinary = 'base64' + #xmloption = 'content' + #gin_pending_list_limit = 4MB + #createrole_self_grant = '' # set and/or inherit + + # - Locale and Formatting - + + #datestyle = 'iso, mdy' + #intervalstyle = 'postgres' + #timezone = 'GMT' + #timezone_abbreviations = 'Default' # Select the set of available time zone + # abbreviations. Currently, there are + # Default + # Australia (historical usage) + # India + # You can create your own file in + # share/timezonesets/. + #extra_float_digits = 1 # min -15, max 3; any value >0 actually + # selects precise output mode + #client_encoding = sql_ascii # actually, defaults to database + # encoding + + # These settings are initialized by initdb, but they can be changed. + #lc_messages = '' # locale for system error message + # strings + #lc_monetary = 'C' # locale for monetary formatting + #lc_numeric = 'C' # locale for number formatting + #lc_time = 'C' # locale for time formatting + + #icu_validation_level = warning # report ICU locale validation + # errors at the given level + + # default configuration for text search + #default_text_search_config = 'pg_catalog.simple' + + # - Shared Library Preloading - + + #local_preload_libraries = '' + #session_preload_libraries = '' + shared_preload_libraries = 'repmgr, pgaudit, repmgr' + #jit_provider = 'llvmjit' # JIT library to use + + # - Other Defaults - + + #dynamic_library_path = '$libdir' + #gin_fuzzy_search_limit = 0 + + + #------------------------------------------------------------------------------ + # LOCK MANAGEMENT + #------------------------------------------------------------------------------ + + #deadlock_timeout = 1s + #max_locks_per_transaction = 64 # min 10 + # (change requires restart) + #max_pred_locks_per_transaction = 64 # min 10 + # (change requires restart) + #max_pred_locks_per_relation = -2 # negative values mean + # (max_pred_locks_per_transaction + # / -max_pred_locks_per_relation) - 1 + #max_pred_locks_per_page = 2 # min 0 + + + #------------------------------------------------------------------------------ + # VERSION AND PLATFORM COMPATIBILITY + #------------------------------------------------------------------------------ + + # - Previous PostgreSQL Versions - + + #array_nulls = on + #backslash_quote = safe_encoding # on, off, or safe_encoding + #escape_string_warning = on + #lo_compat_privileges = off + #quote_all_identifiers = off + #standard_conforming_strings = on + #synchronize_seqscans = on + + # - Other Platforms and Clients - + + #transform_null_equals = off + + + #------------------------------------------------------------------------------ + # ERROR HANDLING + #------------------------------------------------------------------------------ + + #exit_on_error = off # terminate session on any error? + #restart_after_crash = on # reinitialize after backend crash? + #data_sync_retry = off # retry or panic on failure to fsync + # data? + # (change requires restart) + #recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+) + + + #------------------------------------------------------------------------------ + # CONFIG FILE INCLUDES + #------------------------------------------------------------------------------ + + # These options allow settings to be loaded from files other than the + # default postgresql.conf. Note that these are directives, not variable + # assignments, so they can usefully be given more than once. + + include_dir = 'conf.d' + #include_dir = '...' # include files ending in '.conf' from + # a directory, e.g., 'conf.d' + #include_if_exists = '...' # include file only if it exists + #include = '...' # include file + + + #------------------------------------------------------------------------------ + # CUSTOMIZED OPTIONS + #------------------------------------------------------------------------------ + + # Add settings for extensions here + pgaudit.log_catalog = 'off' ## @param postgresql.pgHbaConfiguration PostgreSQL client authentication configuration ## You can use this parameter to specify the content for pg_hba.conf ## Otherwise, a repmgr.conf will be generated based on the environment variables